DIY Pull Down Screen 60cm x 100cm

This is the smallest pull down screen you can have as the roller spring inside is 50cm so trim this one carefully.

The width is 60 cm can be slightly trimmed , Easy to cut with Large hacksaw .

The height is up to 100 cm ( so your window must not be taller than 100 cm in height. ) Easy to cut with Large hacksaw .

Pull Down Screen 60cm x 100cm

Info : Top section : we will pre cut and wind the screen to the sizes given ( 60 cm ) the end that you need to cut or trim will be marked CUT THIS END so you get the exact size for proper fitting .

Legs section : two in the pack , one for each side of the window : : we will pre cut the legs to the sizes given ( 100 cm ) the end that you need to cut or trim will be marked CUT THIS END so you get the exact size for proper fitting .

This is a easy system to fit yourself if you can handle a large hacksaw and silicon applicator all you need to do is measure your window check that the size will work before you order this

Pull Down Screen 60cm x 100cm

.

1. First you cut the top section following the instructions supplied in the pack.
2. Then you cut the legs ( side tracks ) also with the instructions supplied in the pack.
3. Then you either fix the Top section with the screws and plugs supplied or you assemble the screen inside the opening and silicon around the edges ( In my opinion this is the best method of fixing ) You don’t damage the walls at all, and with the drilling method sometimes the fixing is not good and you struggle to get good fixings.

With proper care your Pull Down Screen 60cm x 100cm will last for years , keeping you and your family free of mosquitoes

For the not so diy inclined we also have a fitting service for your Pull Down Screen 60cm x 100cm on the Costa Del Sol, please contact us for details